Rubber Gym Flooring Mats:
- 1m x 1m in size
- All black in colour
- 15mm Thickness
- 6mm bevelled top edge around perimeter
- 100% fine granules
- All Black
- Shock Absorbent
- Non Toxic
- Commercial Grade
- The surface is unsealed
- Approx. 15kg each piece
Out of Stock Sold Out Normally $440.00 $330.00
Our gym tiles have been tested against;
- SGS fire rate certificate: ISO 9239.1: 2010 Reaction to fire tests for flooring determining the burning behaviors using a radiant heat source. This is a safety test to evaluate the combustion and smoke emissions when the tile is exposed to a radiant heat source.
** It is a very important safety feature and also a safety requirement from some councils and land lords if leasing a building.
- SGS VOC test: Volatile organic compounds (VOC) testing services from SGS can help you ensure that our rubber mats comply with international VOC requirements that safeguard the environment and human health.
- TUV Rheinland Product and environmental analyses test.
Rubber Gym Flooring Mats:
The best way to lay the mats is in a stretcher bond (brick pattern).
Lay the first row of mats against the longest straight wall compressing each new mat into the previous mat. When you start the 2nd row start with ½ width mat and compress all the mats towards the corner as you go. This will create a pattern the same as a typical brick wall appears. Continue to compress all mats towards the corner you started from during the entire laying process.
This laying method will remove any minor size tolerances and gaps between each mat and they will all lock together much better than if you were to use a stack bond pattern where all 4 corners of the mats meet at one point.
The best way to cut the mats is with a sharp Stanley knife and a flat straight edge. You will have to make a few passes with the knife to cut through the 15mm depth of the mat. You can also cut shapes by making several passes with the cut and always take extra care by cutting away from yourself and not towards yourself in case the knife slips.
As these mats are a natural rubber product they will slightly expand in the hot summer and contract in cold winter. So it is important to compress the mats tightly together during the initial installation to prevent any small gaps opening up later especially if laying in the warmer months.
If you have mats ending which are not enclosed by walls or physical objects you can either glue the last row of mats down or use a fixed down finishing strip like those used for carpet or floating timber flooring to restrict the mats from moving.
How to clean Recycled Rubber Flooring
On occasion fine dust or dirt may become embedded in the tiles making them more difficult to clean. When that occurs vacuum the tiles thoroughly with a heavy duty vacuum preferably with a beater brush to remove as much dirt as possible to clean the mats.
A mild solution of dishwashing liquid or similar detergent and water work well to clean recycled rubber. Be certain that you do not use too strong a solution as you do not want it to be sudsy or leave any residue when it dries. Whatever cleaner is used we recommend a Nylon mop not a cotton mop as cotton will leave particles behind. Do not use petroleum based cleaners as these can cause deterioration of the tiles. Do not use cleaners containing a wax agent as the wax can cause a build-up on the tiles.
Rubber Gym Flooring Mats:
IMPORTANT: Orders will not be shipped until we receive special delivery instructions and have a shipping address so please ensure you provide these to ensure no delay.
If you are not able or certain you can receive delivery in person between 9am – 5pm Mon - Fri the alternative options are:
Authority to Leave
Please provide your instructions in the Special Delivery Notes field on check out page to leave your order in a specific place e.g 'Please leave around the back of house behind the bins.'
Note - if you authorise your order to be left in a specific place there can be no claims for damaged or missing items
If you would like to pick up the order from your local freight depot you can select this option and we will notify you of the courier depot details for your area.
If you require delivery to a residential address and your order contains any single boxed items over 50kg or combination of heavy/large items : (over 250kg) a tail lift service will likely be required and costs $149.The tail lift charge is not included in the shipping calculator on this website and needs to be added to the total if the service is required. Please contact us if you are unsure whether this service will be required for your order.
The following situations can be exempt from tail lift charges:
Please note: Sometimes in the event that a tail lift truck is not available the freight carrier will hand unload the heavy items off the truck. Hand unload by the freight carrier is covered by the tail lift surcharge if the tail lift service is not available.
1. Once your product is added to cart click View Cart.
2. Enter your postcode at cart to see shipping costs.